Care Hawk CH1000 Uživatelský manuál stáhnout pdf (Strana 10)

7.6.2. The interface connection to a PBX/KSU shall be made from a TC1 to a

PBX/KSU extension to allow any system telephone to have access to the

PBX/KSU.

7.6.3. The interface connection from the PBX/KSU shall be made from the PBX/KSU

extension port to an extension.

7.6.4. This shall allow PBX/KSU telephones to have access to system extension

features.

7.6.5. This shall allow call-ins to be routed from speaker stations to the PBX/KSU

attendant console.

8. SYSTEM FEATURES

8.1.1. The system shall provide user-programmable room number assignment.

8.1.2. The system shall provide 3, 4, or 5-digit numeric format for architectural room

numbering and an alpha-numeric caller ID description associated with each

room in the event of a call in.

8.1.3. The dialing sequence shall incorporate full numeric capabilities as available on

industry-standard telephone key pad.

8.1.4. The DA1 shall allow the user to view the numeric room address and the caller

ID information of the calling station and the call priority (e.g., emergency,

normal). The DA1 shall use distinctive ringing patterns to annunciate the type

of call.

8.1.5. The system shall contain a minimum of 64 multipurpose zones that can be

assigned and programmed as desired between paging, program, or time

zones.

8.1.6. The system shall provide for a minimum of 25 distinct user-programmable

system tones and 25 user-added wav files.

8.1.7. The following programmable system tone events shall be available:

8.1.7.1. Emergency page pre-announce

8.1.7.2. Page pre-announce

8.1.7.3. Door tone

8.1.7.4. Intercom pre-announce

8.1.7.5. Privacy tone

8.1.8. Paging shall originate from any DA1, PBX phone dedicated paging

microphone, or program source input.

All Specifications are Subject to Change CareHawk 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Žádné komentáře

Care Hawk CH1000 Uživatelský manuál Strana 10